Francesca's Smart Emulsion is for use on interior walls and woodwork. It is the toughest of our Emulsions. It is easy to clean and hard wearing. It dries fast and has low VOC count. It is matt and can be touched up. Ideal where there is a lot of passage, or in a children’s bedroom, boots room and kitchen. It is not breathable. Not suitable in bathrooms. It comes in all our colours.
All surfaces should be sound, clean, dry and free of grease. Seal absorbent surfaces with a solution of up to 1part water to 4 parts Francesca’s Smart Emulsion. Prime bare timber and metal surface with appropriate primer.
Stir well before use and apply by brush or roller. Also suitable for application by spray. When using roller, use medium pile synthetic type. Apply liberally and evenly, avoid overspreading.
1 litre will cover approximately 12 square metres depending on porosity of surface.
Touch dry 1-2 hours. Recoat after 4 hours.
Remove as much product as possible from application equipment before washing. Wash tools immediately after use in warm soapy water and rinse thoroughly. Do not empty product in to drains or watercourses.
Colour variation can occur between batches due to the natural pigments used, therefore, it is recommended that all Francesca’s Smart Emulsion be purchased at the same time. Keep the lid tightly on. Keep out of reach of children. Do not swallow and avoid eye contact. If accidental contact occurs, rinse eyes with copious amounts of water. WHEN USING MORE THAN ONE TIN COLOUR IN THE SAME ROOM, INTERMIX BEFORE USE
IT IS VERY IMPORTANT THAT WE ALL START CONSCIOUSLY RECYCLING AND ARE CONSIDERATE ABOUT THE ENVIRONMENT. WE USE PLASTIC BUCKETS FOR ALL OUR WATER BASED PAINTS, BECAUSE THEY ARE EASIER TO CLEAN THAN TINS AND THEY CAN BE REUSED. THEY ARE MADE WITH RECYCLABLE PLASTIC. ONCE THE PAINT IS FINISHED, PLEASE WASH IT OUT AND RECYCLE THE BUCKET ACCORDINGLY. THANK YOU
WE SEND OUR SAMPLE POTS AND PAINTS IN RECYCLED BOXES.