Francesca's Masonry Paint is a water-based product ideal for exterior surfaces. It comes in all our colours.
1 litre covers approximately 16 square meters, depending on porosity of the surface. Stronger colours may require an extra coat. When using more than one tin colour in the same room, intermix before use.
Before application, surfaces must be cleared of loose material, grease and oil.
Stir well before use. Do not thin, except for absorbent surfaces when a small quantity of clean water may be added. Apply Francesca's Masonry paint evenly by brush, roller or spray and avoid overspreading. Recoating after 2 to 4 hours. Do not apply in temperatures below 5 C. Avoid retouching the final coat.
Remove as much product as possible from application equipment before washing. Wash tools immediately after use in warm soapy water and rinse thoroughly. Do not empty product in to drains or watercourses.
Colour variation can occur between batches due to the natural pigments used, therefore, it is recommended that all Francesca's Chalky Emulsion be purchased at the same time. Keep the lid tightly on. Keep out of reach of children. Do not swallow and avoid eye contact. If accidental contact occurs, rinse eyes with copious amounts of water.
IT IS VERY IMPORTANT THAT WE ALL START CONSCIOUSLY RECYCLING AND ARE CONSIDERATE ABOUT THE ENVIRONMENT. WE USE PLASTIC BUCKETS FOR ALL OUR WATER BASED PAINTS, BECAUSE THEY ARE EASIER TO CLEAN THAN TINS AND THEY CAN BE REUSED. THEY ARE MADE WITH RECYCLABLE PLASTIC. ONCE THE PAINT IS FINISHED, PLEASE WASH IT OUT AND RECYCLE THE BUCKET ACCORDINGLY. THANK YOU
WE SEND OUR SAMPLE POTS AND PAINTS IN RECYCLED BOXES.