Francesca’s Lime Wash Primer is made with selected quartz and sands.
It allows the application of the lime wash on surfaces where normally it would not be possible to apply it. (ie: filled and previously painted surfaces)
Francesca’s Lime Wash Primer is breathable and acts like a support between the surface that needs to be painted and the lime wash. It can be used internally and externally.
PREPARATION AND APPLICATION
Before application, surfaces must be cleared of loose material, grease and oil. Apply by roller or brush.
Francesca's Lime Wash Primer ONLY needs one coat . VERY IMPORTANT: Allow 24 hours before the application of the lime wash
Dilute Francesca’s Lime Wash Primer with 10 - 15% of water. 100 to 150 MLS OF WATER FOR 1 LITRE OF PRIMER.
COVERAGE: 4 – 6 square meters over 1 coat.
Remove as much product as possible from application equipment before washing. Wash tools immediately after use in warm soapy water and rinse thoroughly. Do not empty product in to drains or watercourses.
IT IS VERY IMPORTANT THAT WE ALL START CONSCIOUSLY RECYCLING AND ARE CONSIDERATE ABOUT THE ENVIRONMENT. WE USE PLASTIC BUCKETS FOR ALL OUR WATER BASED PAINTS, BECAUSE THEY ARE EASIER TO CLEAN THAN TINS AND THEY CAN BE REUSED. THEY ARE MADE WITH RECYCLABLE PLASTIC. ONCE THE PAINT IS FINISHED, PLEASE WASH IT OUT AND RECYCLE THE BUCKET ACCORDINGLY. THANK YOU
WE SEND OUR SAMPLE POTS AND PAINTS IN RECYCLED BOXES.