A top quality high gloss finish for wood and metal surfaces, both inside and outside. It comes in all our colours.
1 litre covers approximately 17 sq meters, depending on porosity of surface. Strong or contrasting colours may require additional coats. When using more than one tin colour, intermix before use.
Ensure surface to be painted is sound, clean, dry and free from grease. Rub down previously painted surfaces with fine waterproof abrasive paper to provide a key. Avoid the inhalation of dust. Wear a suitable face mask when dry sanding.
Stir well before use. Application by brush, roller or spray. Apply one or more coats as required and allow 16-24 hours between coats under normal conditions. Do not apply over polystyrene surfaces.
Remove as much product as possible from application equipment before washing. Wash equipment immediately after use with White Spirit or Turpentine Substitute. Some locals authority have special facilities for disposal of waste coatings. DO NOT EMPTY PRODUCT INTO DRAINS OR WATERCOURSES. Replace lid firmly. STORE AWAY FROM HEAT AND FLAME
Contains Cobalt Carboxylate and Ethyl Methyl Ketoxime. May produce an allergic reaction. Repeated exposure may cause skin dryness and cracking. Keep away from sources of ignition. No smoking. Ensure maximum ventilation during application and drying. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of reach of children.
IT IS VERY IMPORTANT THAT WE ALL START CONSCIOUSLY RECYCLING AND ARE CONSIDERATE ABOUT THE ENVIRONMENT. WE USE PLASTIC BUCKETS FOR ALL OUR WATER BASED PAINTS, BECAUSE THEY ARE EASIER TO CLEAN THAN TINS AND THEY CAN BE REUSED. THEY ARE MADE WITH RECYCLABLE PLASTIC. ONCE THE PAINT IS FINISHED, PLEASE WASH IT OUT AND RECYCLE THE BUCKET ACCORDINGLY. THANK YOU
WE SEND OUR SAMPLE POTS AND PAINTS IN RECYCLED BOXES.